Filter support mesh by application
What the support layer has to do in six service environments, and the constructions we recommend as a starting point.
Six service environments
Aerospace and high-pressure hydraulics
Service conditions. Mineral and synthetic hydraulic fluids, pressure pulses and element collapse ratings from about 10 bar on return lines up to 210 bar on high-pressure lines.
Recommended construction. Epoxy coated steel 18 x 14 or 18 x 16 mesh for industrial and mobile elements; stainless 316L plain, twill or Dutch weave where phosphate-ester fluids or temperature rule out epoxy.
Hydraulic & liquid filters · Epoxy coated screen · Stainless woven mesh
Oil, gas and petrochemical
Service conditions. Hydrocarbons, amines, water with chlorides and sour service in candle filters, coalescers, process cartridges and screening.
Recommended construction. Stainless 316L woven support 20-40 mesh; plain Dutch 12 x 64 or 14 x 88 as backing; expanded stainless cores. Nickel alloys woven to order for chloride and sour service, with EN 10204 3.1 certificates and XRF alloy checks.
Pharmaceutical, food and biotech
Service conditions. Sterile and hygienic liquid filtration, membrane cartridges and cleaning in place with acids, caustic and steam.
Recommended construction. PET membrane support MS-PET-200/39 for pleated membrane cartridges and MS-PET-150/41 for flat sheet; PA66 grades for alkaline cleaning; 316L woven cloth 50-80 mesh. FDA and RoHS SGS test reports.
Electronics and precision devices
Service conditions. Venting and acoustic membranes in enclosures and devices, medical and diagnostic flow layers, die-cut parts in high volume.
Recommended construction. Thin PET mesh MS-PET-40/35 (55 µm) and MS-PET-64/45 (65 µm); MS-PA-64/45 where elasticity is needed. Slit from 10 mm wide.
HVAC, cleanroom and commercial air
Service conditions. Pleated panels, V-bank and pocket filters for air-handling units, run on rotary and blade pleaters.
Recommended construction. Expanded Z-line pleat backing 18.4 x 31.75 mm on rolls up to 2,400 ft; welded light pleat-backing 1 x 1 in; epoxy aluminium 18 x 16 in charcoal or white.
Pleated air filters · Bag & panel filter backing · Expanded metal
Engine intake, gas turbine and dust collection
Service conditions. Humid and coastal intake air, pulse-jet cleaning of cartridges, vibration and handling.
Recommended construction. Welded mesh hot-dip galvanized after welding (GAW); epoxy coated galvanized steel 14 x 14 or 16 x 16 x 0.25 mm; expanded galvanized or stainless cores 6 x 12 to 11 x 15 mm.
Recommendations are a starting point. The final specification depends on the media, the element design, the pleating or forming process and the service conditions, and is confirmed by the filter manufacturer's own element tests such as ISO 2941, ISO 2942 and ISO 16890.
Full data in the catalogue. Specifications, tolerances, materials and inspection for all six support media are in the MAISHI Filter Support Mesh Catalogue (PDF, 32 pages, 1.7 MB).
Tell us about your filter
Send the filter type, media, service conditions and the position of the mesh. We recommend a support layer.